Looking for a way to jazz up your wall artwork? Try making your individual Diy acrylic frames for customized 3D artwork. This publish will stroll you by means of exactly how I built these in my household.
If you are on the lookout for a customized way to body your photos or artwork to make it stand out from the wall, these Diy acrylic frames are the great detail.
I landed on these frames for the reason that I necessary a very little a thing to include a little extra pizzazz to my bathroom wall. 
We made the decision to include my husband&rsquos really like of golfing into the combine by printing images he took of PGA golfing courses he&rsquos played in black and white.
I like when art is a dialogue piece, so this was the excellent addition to the rest room wall.
To make it actually stand out, I designed these Do it yourself acrylic frames for each of the pictures.
Here are the techniques I took&hellip 
Desk OF CONTENTS
- one. Gather your elements.
- two. Tape just about every aspect of each individual corner.
- three. Mark in which you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to secure your pics to the body.
- six. Mark the total on the wall where by you approach to hold it.
- 7. Use your punch device to mark the full on the wall.
- eight. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- ten. Connect your body to the standoffs.
- 11. Revel in the completed products!
Disclaimer: This post does involve affiliate one-way links for your ease. This is at NO added expense to you but earns me a small commission. To read through extra, look at out our disclosure coverage.
one. Obtain YOUR Materials.
Initial factors very first, get all your products. All resources for every thing I used are joined down below. go to my blog integrated a record with links of what we employed to hang the frames, as well. 
FOR Making THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one for the dimension of the opening of your standoffs and a person for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Device (I made use of a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
2. TAPE Every Side OF Each and every CORNER.
Plexiglass/acrylic is pretty fragile.
Simply because of this, you have to be quite careful when you are drilling the holes.
Positioning a piece of painter&rsquos tape on either aspect in which you approach to drill your gap will enable retain the acrylic sheet from breaking or cracking when you drill.
I also kept the protective deal with on every single side of the piece, too.
three. MARK In which YOU WANT TO DRILL YOUR HOLES.
When you have placed the painter&rsquos tape on all 4 sides (or however quite a few spots you system to drill a hole), you can place a mark of wherever you want to drill your hole.
I drilled my holes 1&Primary in from each edge as you can see from the photograph previously mentioned.
4. DRILL YOUR HOLES.
Ahead of essentially drilling, double and triple examine that your marks are amount both of those horizontally and vertically.
You&rsquoll want to have these level for when you hang them. 
The drill little bit you select must be massive enough to allow the standoff to match inside the hole.
I would do a exam run on a piece of scrap substance to make absolutely sure it is major more than enough. 
After you are specific that the marking are stage and the bit is major plenty of, you want to get started drilling.
Listed here is a superior video to comply with if you would like a demonstration on how to drill by means of acrylic.
You want to use about fifty percent ability when you are drilling.
Sluggish and regular. If you go to fast, the acrylic will crack, so just take your time.
As you drill you must see spirals of the acrylic slowly becoming eliminated. 
Repeat the drilling for each individual hole you need.
five. USE YOUR GLUE DOTS TO Secure YOUR Photographs TO THE Frame.
At the time your holes are designed, you can incorporate your photo to the piece of acrylic/body.
The key below is to again, make sure your photo is stage ahead of you fully protected it to the frame.
The glue dots are really sticky and don&rsquot let for a large amount of wiggle place, so it may possibly be a superior concept to line up a piece of lined paper behind the body to support you line the edges of your photograph.
Whatever trick performs for you to make confident the picture receives glued to the frame stage will do. 
six. MARK THE Total ON THE WALL Where YOU Prepare TO Hold IT.
As you begin to hold, mark your holes on the wall, but make guaranteed your body is amount.
If you measured properly in the stage just before drilling, the holes on your frame must by now be amount.
If you are hanging extra than a person body like I did, make certain just about every frame is stage in your grid, far too. 
seven. USE YOUR PUNCH Resource TO MARK THE Total ON THE WALL.
I love this tool so significantly for the reason that it will get your gap commenced and lets your drill to keep in position when you start drilling.
If you don&rsquot have a single, I really advise it!
8. DRILL YOUR HOLES IN THE WALL.
Be certain to use a little bit that suits the screws that came along with your standoffs.
This will most most likely be a lesser bit than the one particular you utilised on the frames.
I also employed a stud finder to see if I essential drywall anchors, but mainly because these frames are not that large, you could most likely do with out them.
nine. SCREW THE STANDOFFS INTO THE WALL.
When you invest in your standoffs, you&rsquoll see how they work.
In purchase for the image to &ldquostand off&rdquo the wall, you have to protected the standoff with the provided screw prior to attaching the photograph to the standoffs.
As you can see from the photo, creating certain all the things is amount and measured accurately is super crucial. 
ten. Connect YOUR Frame TO THE STANDOFFS.
The moment you&rsquove hooked up the standoffs, it&rsquos time to attach the shots!
Line up the standoffs with your drilled holes and safe the standoffs.
If all goes well, everything will line up correctly and be prepared to go!
If you are like my dad and I, you&rsquoll arrive throughout at least a person that doesn&rsquot line up perfectly.
For this, we cheated a little little bit and secured the standoff to the frame and made use of a glue dot to secure it to the wall, so it didn&rsquot move.
We only experienced to do this for two corners of two frames, but don&rsquot fret if you mess up a person&hellip We&rsquove been there! 
11. REVEL IN THE Completed Merchandise!
Now it&rsquos time to get pleasure from your get the job done!
We did a grid of 9 overall pictures which was a major endeavor with all the measuring, but I&rsquom in love with how it turned out.
Permit me know in the reviews what you assume of the completed products!